200 THRU 600 AMPERE | AM SERIES | 15, 25, 35KV
PRIMARY SECTIONALIZING PEDESTAL
Typical Optional Equipment:
"Mr Ouch" Warning Labels
ANSI Warning Labels
Special Paint Color
Stainless Steel Enclosure
Stainless Steel Parking Stands
Module/Junctions Factory Installed
14 or 12 Gauge Galvanized Steel
Stainless Steel Hardware
Powder Coat Finish
Munsell 7GY3.29/1.5 Green
Stainless Steel Ground Nuts
ANSI C 57.12.28 Security
Positive Alignment Penta-Bolt/Latching Design Lift Out Module Mounting Plates
Stainless Steel Lifting Provisions
PRIMARY SECTIONALIZING ENCLOSURES
Note: 25kV 200A rated products will accept some 200 ampere 35kV rated junctions, contact factory for details.
-W 12Ga. Steel and Western Underground Approved
For units to be supplied from the factory with modules installed insert the corresponding number from below:
2 way 15 kv, 200 Amp= 2
3 way 15 kv, 200 Amp= 3
4 way 15 kv, 200 Amp= 4
2 way 25 kv, 200 Amp = 5
3 way 25 kv, 200 Amp = 6
4 way 25 kv, 200 Amp = 7
For 2, 3 & 4 way 600 Amp modules, please contact manufacturers representative or factory.
25kv units will accomodate 15kv modules and 600A units will accomodate 200A modules.
PRIMARY SECTIONALIZING PEDESTALS
All steel burial sleeves are fabricated from 12 gauge galvanized steel and have an oven cured powder polyester finish. The sleeves are bolted together with stainless steel carriage bolts.
Both the steel and fiberglass burial sleeves are designed so that when they are properly attached to the sectionalizing pedestal, the fit between the pedestal and sleeve will meet the requirements of ANSI CS?.12.28-1999 for Pad Mounted Equipment Enclosure integrity.